The Termate Terminal Range offers a complete selection of stud-type terminals engineered for reliable electrical performance and mechanical integrity.
Available in sizes M4 to M12, these interlocking and heavy-duty variants provide safe, secure terminations across a wide voltage spectrum.
Manufactured from flame-retardant polyamide or glass-fibre-reinforced polyester DMC, each terminal maintains strength, insulation, and stability even under vibration or thermal stress.
Designed, tested, and approved to international standards, Termate terminals deliver long-term reliability in switchgear, control panels, and power distribution systems.
Key Features
Technical Information for Terminals
You will find useful technical information below but, if you have any questions, please contact our technical team for support.
| Terminal Range | Part Number | Mounting Rail | Marker 0-9 A-Z | Cover | Link | Square Washer | Cover Fixing | Fixing Screw* Not of Termate supply. |
|---|---|---|---|---|---|---|---|---|
| TER-MINI | M4A/M4A BRASS | RA | 91506 | CBA | LKM4A LK4DSP† | SW4 | – | M4x16 |
| TER-MIDI | TBA4/TSA4 | RA4 | – | CBA4 | LK4MS-A | – | – | M3x12 |
| TER-MIDI | TBA5/TSA5 | RA | – | – | LK5TM-A | SW4 | – | M4x16 |
| TER-MIDI | TBA6/TSA6 | RA | – | – | LK6A | SW4 | – | M4x16 |
| TER-MIDI | MBA5/MSA5 | RA | 91506 | CBA | LK5TM-A | SW4 | – | M4x16 |
| TER-MIDI | MBA6/MSA6 | RA | 91506 | CBA | LK6A | SW4 | – | M4x16 |
| TER-MIDI | MBA8 | RA8 | 91506 | CTM5 | – | – | 2A4BAP/TMPL | M4x40 |
| TER-MAXI | MSA10/MSA12 | RA12 | – | – | – | – | – | M5x20 |
| TER-MAXI | (barrier) MSB | RA12 | 91506 | – | – | – | – | – |
| TERMA-TWIN | TM5 | RA | 91506 | CTM5 | LK5TM-A | – | 2A4BAP/TMPL | M4x25 |
| TERMA-TWIN | TM6 | RA8 | 91506 | CTM6-8 | LK6TM | – | 2A4BAP/TMPL | M4x40 |
| TERMA-TWIN | TM8 | RA8 | 91506 | CTM6-8 | LK8TM | – | 2A4BAP/TMPL | M4x40 |
* Fixing screw length assumes stand mounting rail used.
† Drip Solder Pin
Supplied in 1 Metre lengths unless detailed otherwise.
Mild Steel—Zinc Plated and Passivate
To support rail when fixing.
| Link Part Number | Current Rating Amps | L mm | W mm | Thickness mm | C mm | Dia holes mm |
|---|---|---|---|---|---|---|
| LK4MS/A | 15 | 25.4 | 10 | 1.00 | 16 | 4.2 |
| LK5TM/A | 25 | 33 | 10 | 1.50 | 22.26 | 5.5 |
| LK6A | 60 | 32 | 13 | 1.25 | 22 | 6.3 |
| LK6TM | 60 | 40 | 12 | 1.25 | 28 | 6.3 |
| LK8TM | 100 | 44 | 16 | 2.00 | 28 | 8.5 |
| Part Number | Creepage Distance Terminal to Terminal (mm) | Creepage Distance Terminal to Earth (mm) | Clearance Distance Terminal to Terminal (measured with unfurnished studs) | Provision for Marker Tags |
|---|---|---|---|---|
| M4A | 20.5 | 7.5 | 7.5 | up to 4 per side |
| M4A BRASS | 20.5 | 7.5 | 7.5 | up to 4 per side |
| M4AB | – | – | – | up to 4 per side |
| M4AF | – | – | – | – |
| TBA4 | 17.0 | 13.0 | 11.5 | – |
| TSA4 | 17.0 | 13.0 | 11.5 | – |
| Base TBA4 | – | – | – | – |
| TBA5 | 24.0 | 14.0 | 17.0 | – |
| TSA5 | 24.0 | 14.0 | 17.0 | – |
| Base TBA5 | – | – | – | – |
| TBA6 | 22.5 | 13.5 | 16.0 | – |
| TSA6 | 22.5 | 13.5 | 16.0 | – |
| MBA5 | 24.0 | 14.0 | 17.0 | Up to 4 |
| MSA5 | 24.0 | 14.0 | 17.0 | – |
| MBA6 | 22.5 | 13.5 | 16.0 | Up to 4 |
| MSA6 | 22.5 | 13.5 | 16.0 | – |
| Base MBA | – | – | – | Up to 4 |
| MBA8 | 22.5 | 22.0 | 24.0 | up to 6 |
| MB8 | – | – | – | up to 6 |
| MSA10 | 41.5 | 35.0 | 34.0 | – |
| MSA12 | 41.5 | 35.0 | 34.0 | – |
| MSB | – | – | – | up to 4 |
| TM5 | 15.0 | 13.0 | 14.0 | up to 6 |
| TMB | – | – | – | up to 6 |
| Base TM5 | – | – | – | – |
| TM6 | 29.5 | 23.5 | 25.5 | up to 6 |
| TM8 | 25.5 | 22.0 | 24.0 | up to 6 |
| TMB8 | – | – | – | up to 6 |
Each stud provides a bolting medium for two or more cables.
This method of connection is particularly suitable where resistance to vibration is important.
Termate is committed to the highest standard of customer focus and we have made every effort to maintain the accuracy and completeness of the information provided in this data.
Where improvements to our products affect their installation and usage we endeavour to contact any customers who may be affected.
Warranty as stated in our Terms and Conditions of Trading is void if any modification is made to the warranted product.