RMS Range

RMS6-5 & RMS3-10

Material: Glass Reinforced Polyamide 6.6
Conductor Temp: 140 °C^†
Flammability: UL 94 V-0
Glow Wire: 960 °C
Equipment Voltage U_e: 1000V AC, 1500 V DC
Insulation Voltage U_i: 1000V AC, 1500 V DC
Impulse Voltage U_imp: 12 kV
UL Recognised Component: File number E505645

^† In line with the limits set out in IEC 61439, insulating components in contact with conductors may be required to continuously operate at an average of 140 °C (max 145 °C).

This range of products meets the requirement, the material for them being assigned thermal class F established using methods similar to IEC 60085

Fault Levels – Insulator tested at 300 mm spacing

Part Number	3D Model	Conductors	Support Phase Centres	Termate LCW Rating	Duration
RMS6-5	RMS6-5 STEP file	6 × 50×5	110	50 kA	1 s
RMS3-10	RMS3-10 STEP file	1 × 50×10	110	50 kA	3 s
RMS3-10	RMS3-10 STEP file	2 × 50×10	110	50 kA	3 s
RMS3-10	RMS3-10 STEP file	3 × 50×10	130	65 kA	1 s
RMS3-10	RMS3-10 STEP file	3 × 50×10	130	50 kA	3 s
RMS3-10	RMS3-10 STEP file	3 × 75×10	130	65 kA	1 s
RMS3-10	RMS3-10 STEP file	3 × 75×10	130	50 kA	3 s

Insulated Copper RMSI3-10

Material: Glass Reinforced Polyamide 6.6
Conductor Temp: 140 °C^†
Flammability: UL 94 V-0
Glow Wire: 960 °C
Equipment Voltage U_e: 1000 V AC, 1500 V DC
Insulation Voltage U_i: 1000 V AC, 1500 V DC
Impulse Voltage U_imp: 12 kV
UL Recognised Component: File number E505645

^† In line with the limits set out in IEC 61439, insulating components in contact with conductors may be required to continuously operate at an average of 140 °C (max. 145 °C).

This range of products meets the requirement, the material for them being assigned thermal class F established using methods similar to IEC 60085

Fault Levels – Insulator tested at 300 mm spacing

Part Number	3D Model	Conductors (Insulated)	Support Phase Centres	Termate LCW Rating	Duration
RMSI3-10	RMSI3-10 STEP file	1 × 50×10	110	50 kA	1 s
RMSI3-10	RMSI3-10 STEP file	2 × 50×10	110	50 kA	1 s
RMSI3-10	RMSI3-10 STEP file	3 × 50×10	130	50 kA	1 s
RMSI3-10	RMSI3-10 STEP file	3 × 75×10	130	65 kA	1 s

Mounting Rail

Slot dimensions should be 15×10 mm, tolerance of ±0.3 mm on both dimensions

RMS6-5

RMS3-10

RMSI3-10

Base Detail

Termate is committed to the highest standard of Customer Focus and we have made every effort to maintain the accuracy and completeness of the information provided in this data. Where improvements to our products affect their installation and usage we endeavour to contact any Customers who may be affected.

Warranty as stated in Encompass Terms and Conditions of Trading is void if any modification is made to the warranted product.